Installation Instructions
P5I915PL
6
Line-in jack, Microphone-in jack and Speaker-out jack
The Line-in jack can be connected to devices such as a cassette or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect speakers or headphones for audio output
from the internal amplifier.
6-Channel Audio(available on -6A mainboard)
This mainboard utilizes ALC655 chip providing 6-channel Audio, which consists of Front Left,
Front Right, Rear Left, Rear Right, Center and Woofer for a complete surround sound effect.
When 6-Channel audio is available, the front Left&Right jack can be connected to the Front
speskers, the Back Left&Right jack can be connected to the rear speakers and the
Center&Woofer jack can be connected to the center speaker and woofer.
Microphone function is offered by F_AUDIO Connector on the mainboard now.
If set 2-Channel Audio mode on -6A or -6AL mainboard, you can connect two speakers to the
Front Left&Right jack, at the same time use the Rear Left&Right jack as Line in jack, and use
the Center&Woofer jack as Microphone in jack.
Speaker out
Line in
Microphone in
Front Left&Right
Rear Left&Right
Center&Woofer
8-Channel Audio(available on -8A mainboard)
This mainboard utilizes ALC880 chip providing 8-channel Audio, which consists of Line in,
Front speaker out,Mic in, Side speaker out, Rear speaker out, Center&SubWoofer speaker out
for a complete surround sound effect.
Center&SubWoofer
speaker out
Rear speaker out
Side speaker out
Line in
Front speaker out
Mic in
Note: To enable record function, first install ALC880 driver, then enter the control panel of
system and make sure “Realtek HD Front Pink Jack” is selected in the sound recording default
device before using front mic to record sound, if you select”Realtek HD Audio rear input”, you
can use rear mic to record sound.
