C h a p t e r 2
C h a p t e r 2
C h a p t e r 2
C h a p t e r 2
C h a p t e r 2
15
Intallation Instuctions
Intallation Instuctions
Intallation Instuctions
Intallation Instuctions
Intallation Instuctions
P4I865G/P/PEA User’S Manual
Infrared Header (IrDA)
This connector supports wireless transmitting and receiving device. Before
using this function, configure the settings for IR Address, IR Mode and IR IRQ
from the “INTEGRATED PERIPHERALS” section of the CMOS SETUP.
Wake-Up On LAN (WOL)(-L)(-K)
Through the Wake-Up On LAN function, a wake event occurring from the net-
work can wake up the system. If this function is to be used, please be sure an
ATX12V power supply of which 5VSB line is capable of delivering current at least
720mA, and a LAN adapter which supports this function is used. Then connect
this header to the relevant connector on the LAN adapter, set “Wake up on LAN”
as Enabled in the “POWER MANAGEMENT SETUP” section of the CMOS SETUP.
Save and exit, then boot the operating system once to make sure this function
takes effect.
Empty
GND
IrDA (J8)
+5V
IRRX
IRTX
WOL(CN17)
+5V standby
GND
Signal for waking up
