Installation Instructions
6
Manual for N2 series
Line-in jack, Microphone-in jack, Speaker-out jack and MIDI/Joystick
Connector
The Line-in jack can be connected to devices such as a cassette or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect speakers or headphones for audio
output from the internal amplifier.The MIDI/Joystick connector allows you to connect a game
joystick or a MIDI device.
ATX Power Supply Connector & Power Switch( POWER SW )
Be sure to connect the power supply plug to this connector in its proper orientation. The
power switch ( POWER SW ) should be connected to a momentary switch . When powering
up your system, first turn on the mechanical switch of the power supply (if one is provided),
then push once the power switch. When powering off the system, you neednt turn off the
mechanical switch, just
Push once
*
the power button.
Note: If you change “soft-off by PWRBTN” from default “Instant-off” to “Delay 4
Sec” in the “POWER MANAGEMENT SETUP” section of the BIOS, the power button
should be pressed for more than 4 seconds before the system powers down.
MIDI/Joystick
Speaker out
Line in
Microphone in
5V
5 V
-5V
GND
GND
PS-ON
-12V
3.3V
GND
12V
5VSB
5V
GND
3.3V
GND
5V
GND
PS-OK
3.3V
GND
ATX Power Supply Connector
N2en.p65
02-6-4, 16:52
6
Summary of Contents for N2
Page 10: ...This page is intentionally left blank 4 N2en p65 02 6 4 16 52 4...
Page 44: ...38 Manual for N2 series N2en p65 02 6 4 16 53 38...
Page 45: ...Appendix 39 Manual for N2 series N2en p65 02 6 4 16 53 39...
Page 64: ...58 Manual for N2 series DDR DIMM Configuration Matrix for IGP 128 N2en p65 02 6 4 16 54 58...