Manual for KinetiZ 7T
l
Boot Up
Enabled
Tests floppy drives to determine whether they
Floppy Seek
Disabled
have 40 or 80 tracks.
l
Boot Up
O n
Keypad is used as number keys.
Numlock Status
Off
Keypad is used as arrow keys.
l
Gate A20
Normal
The A20 signal is controlled by the keyboard controller
Option
or chipset hardware.
Fast
Default setting. The A20 signal is controlled by Port 92
or the chipset specific method.
l
Typematic Rate
Enabled
Keystrokes repeat at a rate determined by the
Setting
Disabled
keyboard controller - when enabled, the
typematic rate and typematic delay can be
selected.
l
Typematic Rate
6-30
The rate at which character repeats when you
(Chars/Sec)
hold down a key.
l
Typermatic Delay
250-1000
The delay before keystrokes begin to repeat.
(Msec)
l
Security Option
System
Selects whether the password is required every
Setup
time the system boots or only when you enter
setup.
l
OS Select For
Non-OS2
If your operating system is not OS/2, please select
DRAM>64MB
this item.
OS2
If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
l
Video BIOS
Enabled
Video BIOS will be copied to RAM. Video Shadow
Shadow
will increase the video speed.
Disabled
Video shadow is disabled.
l
C8000~CBFFF
Enabled
Optional ROM will be copied to RAM by 16K bytes
Shadow:
per unit.
... ...
DC000-DFFFF
Shadow:
Disabled
The shadow function is disabled.
l
Flash Write Enabled
Does not allow you to upgrade the BIOS.
Protect
Note: Enabling this item can protect the
system BIOS from being attacked by severe
virus such as CIH. Therefore disable this
item item only when wanting to flash BIOS,
afterwards set this item as Enabled (default).
Disabled
Disabling this item allows you to upgrade the BIOS.
l
Show Bootup
Enabled
Enables the logo when system boots up.
Logo
Disabled
Logo will not be shown when system boots up.
BIOS Description
