BIOS Description
"
Manual for J6A series
#
Video Off
Blank Screen
The system BIOS will only blank off the screen
Method
when disabling video.
V / H SYNC +
In addition to Blank Screen, BIOS will also turn
Blank
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
DPMS
This function is enabled only for the VGA card
Support
supporting DPMS.
#
MODEM Use IRQ
3,4,5,7,9,
Special Wake-up event for Modem.
10,11
NA
This function is not applied.
#
Soft-off by
Instant-off
The system will power off immediately once the
PWRBTN
power button is pressed.
Delay 4 Sec
The system will not power off until the power
button has been pressed continuously for more
than 4 seconds.
#
State After
Auto
The system remains former state/Off/On when the
Power Failure
Off,On
AC power supply resumes.
#
"
Wake Up Events
Press Enter
Sets the following items.
#
VGA
On
VGA active reloads global timer.
Off
VGA active has no influence to global timer.
#
"
LPT&COM
LPT, COM
Sets the options of these items to reload global
LPT/COM
timer.
None
LPT&COM active has no influence to global timer.
#
"
HDD&FDD
On
HDD&FDD active reloads global timer.
Off
HDD&FDD active has no influence to global timer.
#
PCI Master
On
PCI Master active reloads global timer.
Off
PCI Master active has no influence to global timer.
#
Power On by PCI
Enabled
Enables to wake up by PCI card.
Card
Disabled
Disables to wake up by PCI card.
#
RTC Alarm
Enabled
RTC alarm can be used to generate a wake event
Resume
to power up the system which is in power-off
status. You can set any date or any time to
power up the system.
Disabled
RTC has no alarm function.
J6Aen.p65
02-7-29, 9:55
24
