Qcam QSD-481 Quick Start Manual Download Page 5

 

 

 

When the QSD-481 is connected to the lighter through the 5V car adapter and the auto on /off 
mode is selected:  
Car-activated Recording: Auto-starts recording once the car is started, auto-stops recording 
when car is stopped.  
Car-stop Recording: Auto-starts recording when car is stopped, auto-stops recording once car is 
started. 
Car-activate and Car-stop Recording: Auto-starts recording once car is started and continues to 
record even when the car is stopped. The camcorder needs to be turned off manually. 

*For the longest recording time, set Video Quality to Low, Resolution to 320x240 and Frame 
Rate to Low. This way the QSD-481 can act as a digital voice recorder. 
** If a recording is started, you cannot switch between modes. 
*** If triggering is enabled, the QSD-481 will record for 10 seconds after powering-up. Then it 
will go into standby. If there is a trigger, it will keep recording until there are no further triggers. 
After that, it will record for 5 more minutes and then standby again. 

PC Software Widget 

To synchronize the time and customize settings, download the PC software “Widget” from 

Qcam.com/qsdsupport

 and follow the instructions in the software guide. 

Reviews: