8
IS125 Conveyors | Installation & Maintenance Instructions
Mounting Steel Stands to Conveyor
u
Adjust Height of Stand
4
x
4
x
1
Loosen hex head screws.
2
Slide H section up or down
in channel.
3
Re-tighten screws to secure
it in position.
Make adjustments to height of stand before installing conveyor. If it is necessary to use the stand’s telescoping adjustment once the conveyor it installed, the conveyor must
be supported by some other means, as the stand will not support any weight during the adjustment.
u
Attach Conveyor to Base Plate
Follow appropriate instructions in the Mounts section of this manual.
u
Measure & Cut Unistrut
1
Measure inside distance
between stands.
2
Cut unistrut sections to
length with appropriate saw.
(Electric chop saw recommended)
