4.4.8 Setup home stay arm zones
Note
:
All new added sensors are in home stay arm zone, the following steps can cancel home stay arm zone.
4.4.11 Check Alarm Records
Red Icon: Unread Alarm Records
Grey Icon: NO Alarm Records
Click here can check all hosts
alarm records.
2
4
2
2
As pictures shows: There
are two unread water
leakage alarm message.
1. Enter
into sensor management interface,
click the icon of home stay arm.
2.
In pop up window, switch to
OFF status and confirm.
3.
After setup, the sensors are not in status of
home stay. It will not be trigger to alarm
when the panel in home stay mode.
1. Click related host to get into
users management interface.
2
.
Click related icons to check alarm messages.
Click “Delete Alarm”to delete all the red bubbles.
4.4.9 Modify Zone Name
4.4.12 APP Alarm Handling and Some Notices
1. Intrusion detectors (Door Sensor/ PIR motion sensor/ More detectors) only can be triggered to alarm when host is in
ARM status. Other types detectors (SOS button / medical call button / fire detector) can directly trigger to alarm even in
disarm status.
2. In Home Stay ARM status, the switch of intrusion detectors needs to turn on so that can be triggered to alarm.(Default
for newly added detectors arehome stay arm detectors, user can modify the zone types, details please refer Step 4.4.8 ).
3. If sensors had been triggered to alarm, there will be a red spot on sensor management interface. Other types such as
(operating record/power failure/ temper switch) alarm message will appear in “Alarm Records”, with a red spot there.
1. Enter into sensor management
interface, chose the zone.
2
.
In pop up window, input new name,
for example, “Front Door Alarm”.
3
.
Modified successfully
.
After checked, the red spot will disappear. Or click “clean” to delete all red spot.
4.Different type of alarm message, APP will push different alarm music to inform users.
4.4.10 Check Sensors’ Status
5. If turn on “ when GSM network breakdown, APP push message alert” function, when the host detect there is something
wrong with the GSM network, APP will push message to alert all the users.
6.If turn on “When WiFi network breakdown, auto change to GSM network” function, when WiFi network breakdown, Host
will send SMS to the 3 preset SMS numbers for reminder.
Gat e
Detector001
Front
Door Alar m
Det ect or003
Det ect or004
Door/window sensor disconnected
Door/window open
7. When those sensors such as door/window sensor, PIR detector, gas detector, water detector, smoke detector are
disconnected with alarm host, APP will push alert message (without SMS alert message), and in sensors management
interface the related icon will be in grey color.
8.When those sensors such as door/window sensor, PIR detector, gas detector, water detector, smoke detector are in low
battery, the APP will push low battery alert message every two hours. ( This function can be turn off), also in sensor
management interface there will be low battery icon listed.
Door/window closed Door sensor low battery
9. Door sensor closed/open status can be checked and if door had not been closed properly when host armed, APP will
1.
Click into sensor management
2
.The
management interface of
push alert message, also in sensor management interface there will be door open/closed status icon listed.
14
interface
,
chose the zone.
door/window sensors.
15
