Panel PC
Contents
A
Installation
C
Indication
B
Quick Start Guide
DC Power Adapter
Power Plug
Plug USB cable into USB port
Step 1
Step 2
Fix the screws to secure the USB cables.
Bracket
USB cable
Screw pack
(Screws*7, Rubber caps*4)
Provided in screw pack
Reset Button
DC 5V IN
USB
ADB
Speaker
Touch screen
LED indicator light
NFC
Microphone
Bracket
1.
Cable connection
Please visit this link for software installation manual.
http://www.qbictechnology.com/support
2.
Surface Bracket Mount Installation
Step 1
Install the bracket on surface
Screw specifications: KA4*14,
diameter: 7 mm
(Screws are not provided)
Step 3
Tighten the screws. Locations
are shown in above illustration.
Screw specifications: M2*5 (T6)
(screw pack)
Step 4
Cover the screws with
rubber caps.
Step 2
Assemble the panel PC
to the bracket
3.
Adhesive Bracket Mount Installation
Step 4
Peel off the adhesive and
attach the panel PC on a
smooth and clean surface
Step 1
Laminate adhesive to
the back of bracket
* Please install and use this product in strict accordance with the instructions.
Step 2
Install the bracket onto
the panel PC bracket
slot (at the back)
Step 3
Tighten the screws and cover
them with rubber caps
Screw specifications: M2*5 (T6)
(screw pack)
QUICK START GUIDE
QUICK START GUIDE
Adhesive tape