Qball Qball Quick Setup Manual Download Page 2

How to Setup

Before you Begin...

Just a few quick steps, and you’ll be Qballin’ in no time!

It’s important to charge your Qball 

fully before the fun starts.  

Here’s how to do it!

Quiet Toss

Qball knows when to be quiet.

The Qball is a smart microphone that knows 
when it is being tossed and automatically 

mutes itself to avoid any unwanted noise. 

Hush Mode

Qball knows when to stay quiet.

Done using the Qball for a bit? Simply flip the 
Qball uspside down onto the Windscreen and 

it will automatically mute istelf. 

Auto Sleep

Save battery life for more fun times ahead.

To save battery life the Qball automatically 

goes into standby mode if no movement

is sensed for 15 minutes. To wake it back up 

just give it a shake.

Auto Off

Forget to turn off the Qball? No problem.

After two hours of inactivity, the Qball will 
automatically turn itself off.  So, if you forget 
to manually power off— no worries. Odds are, 

there’s more fun to be had on that charge.

Toggle on or off by quickly pressing the 

mode button.

Toggle on or off by pressing the mode 

button for two seconds.

Toggle on or off by quickly pressing the 

mode button.

Toggle on or off by pressing the mode 

button for two seconds.

Qball’s Awesome  Features

1.  Access Qball Controls

STEP 2: 

Twist counter-clockwise 1/8

th

 

of a turn, and pull it out to reveal the 

Microphone and Controls.

STEP 1:

 

Firmly grasp the windscreen 

(as indicated by the orange dots). 

Then...

2.  Charge before first use

Plug the Qball into the charging port using 

the included MicroUSB cable. Charge 

until the Red charging LED turns Green 

before first use.

STEP 1.1: 

Plug the Receiver 

into the wall with the provided 

MicroUSB power cable, and it will 

turn on automatically. 

STEP 1.2:

 

Connect one end 

of the provided Audio Cable into 

the OUT port on the back of the 

Receiver. 

STEP 1.3:

 

Connect the other end 

of the Audio Cable into the AUX IN 

port on your speaker.

STEP 1’S OBJECTIVE:  
Setup the Receiver—which is how 

Qball “talks” to your speakers.

STEP 2’S OBJECTIVE:  
Power on the Qball, Pair, then Play!

*If you prefer to use the LINE IN port, check out 

buyqball.com/support for instructions.

*

1

2

3

Step  1  of  2

STEP 2.1: 

Once your Qball is charged, 

turn it on by pressing the power button. 

STEP 2.2:

 

The LED indicator light 

around the power button will change 

from flashing Blue to solid Blue, 

indicating a connection has been made.

STEP 2.3:

 

You can then adjust the 

volume using the        and        buttons, or 

select a mode. Replace the Windscreen, 

and you’re all set!

Step  2  of  2

Reviews: