5. Assembly the LED light plate to the light
kit fixing bracket by the screws and
connect the LED light kit by male &
female plug. Then, assembly the shade to
the light plate .(Fig 5)
6. Now, the fan is completed.(Fig 6)
7. Installation of the ceiling fan
1. Insert down rod over upper canopy,
then insert the cross pin over yoke &
cotter pin and fasten the 2 screws
which fix the down rod(Fig 1)
2. Install the mounting plate by screws
(Fig.2)
3. Make sure the fan is disconnected from
the electrical supply and carefully insert
the fan into the Mounting bracket. Rotate
the
fan until the notch of the hanger ball
engages the pin of the mounting bracket.
Then, firmly fix the screws.(Fig3)
4. Insert the remote control receiver on the
mounting bracket. Connect the motor
wires, LED light wires and receiver’s
power wires to the receiver by male &
female plug.Also, connect the ground
wire by male & female plug.Then connect
the power supply with the
fan.(Fig4)
If the fan or light kit is PARTIALLY pre-assembled, you can skip the assembly procedures to next step
P.4
