2 Y E A R S
G U A R A N T E E
Unchangeable LED
Scout WL Dark Grey
92301
Max.6x0.5W LED
3000K±300K
10000H
3.7V
1800mAh
LI-ION
Rechargeable
battery
III
INSTRUCTION MANUAL
1
2
1
2
φ6mm
30mm
3
5
7
7 M
4 M
appro.90°
1.8-2.5m
10.1cm
14.3cm
12.1cm
75°
13.5cm
6
AUTO
ST4x30mm
4
8
ST4x30mm
6x
6x
6X27
0
IP44
█
HOW TO DETERMINE WHERE TO MOUNT YOUR SOLAR PIR SENSOR LIGHT
The most important thing to remember for the operation of your SOLAR PIR SENSOR LIGHT is that
it works from the power contained in DIRECT SUNLIGHT. The more direct sunlight the solar cell
receives in a day, the longer the light will operate.
■
Main Unit:
The main unit contains 6*0.5W LED, motion sensor and battery (3.7V 1800mAh LI-ION
Rechargeable battery). When deciding where to mount this unit, keep in mind that the motion
sensor that actives the light has a “field of vision” of min. 7 meters (in front of the light) and about
90º (horizontal) at 25
℃
environmental temperature.
■
Solar Cell:
The solar cell is the power source for the SOLAR PIR SENSOR LIGHT. It converts the sun’s energy
into electricity that charges the battery stored in main unit. This requires DIRECT SUNLIGHT
falling onto the face of solar cell for as long as possible over the course of day.
█
CLEANING
It is important that the solar panel is kept free of dirt and debris. A dirty solar panel will not allow
the battery to fully charge and this will shorten the life of battery and cause the light to malfunction
Important:
Please ensure that you charge the solar lights in maximum sunlight for a
period of up to 3 days (for 1800mAh Li Battery) before switching on the lights, in order that
the lights work on a full charge
