5.
Make sure the wiring correct, if you are not sure, pls
consult qualified electrician (Fig.6)
Black +Brown wire “L”
Blue wire “N”
Green & yellow wire
6. Hang up the fan and assembly
the mounting plate with the
motor set by 4 side screws
(Fig 7)
7. Assembly the blades to blade
holders (Fig 8)
8.
Move away the stopper from motor (Fig 9)
9. Connect the light kit by male and female connector.
(Fig 10)
10.
Tight up the screws, overtightening of the screws may
crack the lamp shade and cause daangers.(Fig 11)
11.
Loose the lock ring before install
the light bulb (Fig 12)
12.
Install the light bulb
(bulb not provided)(Fig 12)
P.7
