Qazqa Cool Fan 52, Instruction Manual

Page: 3 / 12

1) General
P.3
 Before carrying out any work on the fan, disconnect it from the electrical supply!
 Check if the electrical specifications of this appliance are compatible with your installation. The supplier
accepts no responsibility for any physical injury or material damage resulting from incorrect use or
installation of this fan. If you have the slightest doubt, please contact electrician.

Unauthorized use and technical modifications to the appliance can lead to danger to life and health.
 This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
 Children should be supervised to ensure that they do not play with the appliance.

This appliance is for indoor use only.

Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
 Never install the appliance in a moist or wet room.
 Be careful when working near the rotating blades. The fan should be installed at least a height of 2.3m

Before pushing the reversible slide switch, it is necessary to stop the action of the blades by turning off the
fan

Don’t place your arm or other object in the path of the blades, when the fan is operating.
 Always maintain the minimum distance between the lamp and any inflammable material (curtains,
wall etc), as indicated on the pictogram

Means for all poles disconnection having a contact separation that provide full disconnection under over
voltage category III conditions must be incorporated in the fixed wiring in accordance with national wiring
rules.
 Power supply wire from ceiling needs 1.5 sq mm wire

Regarding the method of the cable connection , how to assembly and the bulb type reference of a luminaire ,
thanks to refer to the section “INSTALLATION”
 Warning: Before obtaining access to terminals, all supply circuits must be disconnected.