+
-
Daylight Sensor
Radar
Motion Sensor
Charlotte Black Solar
104416/104417
Installation
1
2
3
1. Loosen the screws on the bottom of luminaire and take the baseplate out.
2. Install the baseplate on the concrete as shown below.
3. Fix the luminaire on the baseplate by screws.
Cautions
1. Please install this solar LED Lamp at the places exposed to the sunlight directly, no shelter.
2. If the LED light start to continuously flashing, it indicates that the unit is low on power and need to be recharged.
3. Please do not change anything of solar panel or battery.
4. Please understand that the working time will be effected when sunshine is not enough(Rainly, Cloudy).
