5. Make sure the fan is disconnected from
the electrical supply and carefully insert
the fan into the Mounting bracket. Rotate
the fan until the notch of the hanger ball
engages the pin of the mounting bracket.
Then, firmly fix the screws.(Fig5)
6. Assembly the LED light plate to the light kit
fixing bracket by the screws and connect
the LED light kit by male & female plug.
Insert the remote control receiver on the
mounting bracket. Connect the motor
wires, LED light wires and receiver’s
power wires to the receiver by male &
female plug.Also, connect the ground
wire by male & female plug.Then connect
the power supply with the fan.(Fig6)
7. Assembly the shade to the light plate and
assembly the upper canopy to the
mounting bracket. Both rotate
clockwise when assembling.(Fig 7)
8. Now, the fan is completed.(Fig 8)
7. Installation of the ceiling fan
1. Insert down rod over upper canopy, then
insert the cross pin over yoke & cotter pin
and fasten the 2 screws which fix the
down rod(Fig 1)
2. Install the mounting plate by screws
(Fig.2)
3. Loose the screw from motor.(Fig 3)
4. Install the blade on the motor by
screws.(Fig.4)
If the fan or light kit is PARTIALLY pre-assembled, you can skip the assembly procedures to next step
P.4
