Copyright (C) 2013-2014 QAT Audio Technology Ltd
All Rights Reserved
- 5 -
3.2 Use a wireless router (connect by Ethernet cable)
If you have a wireless router at home, you can connect the host to the route (DHCP function
of the router must be enabled). Insert one end of the Ethernet cable in the LAN interface of
the wireless router, and the other end into the RJ45 interface on the rear panel of the host.
Then follow the steps below:
1)
Tap “Settings” on the iPad screen, and find “WLAN”. Choose the correct network (your
home Wi-Fi) and tap to connect (enter the password if it is required). Then iPad and
the host will be connected.
2)
Back to iPad main screen, and tap app “QAT” to operate the host.
Note:
To acquire the metadata of the CD album during importing, the wireless router must
have Internet access.
When your iPad is too far away from the wireless router or when there are too many
obstacles such as walls in between, the connection may be unstable.
3.3 Use a wireless adapter (“Wireless Mode” connect wirelessly)
In this way, the host doesn’t need an Ethernet cable. You can use the USB wireless adapter,
which is included in the original package, to connect the host and the wireless router (DHCP
function of the router must be enabled):
1
)
Connect the USB wireless adapter and the host through the USB port on the rear
panel.
2
)
Tap app“QAT” on your iPad to enter the main screen, and then tap “Settings” on the
left upper corner. In the network options, See the item of “WLAN Mode”, press “change”
and then select “wireless mode”, and type in the SSID of the wireless network and the code.
3
)
Tap OK and quit app ”QAT ”.
4
)
Tap iOS “Settings” on your iPad, and find “WLAN”. Choose the correct network (your
home Wi-Fi) and tap to connect (enter the password if it is required). Then iPad and the
host will be connected.
5
)
Back to iPad main screen, and tap app “QAT” to operate the host.
Note:
To acquire the metadata of the CD album during importing, the wireless router must
have Internet access.
When your iPad is too far away from the wireless router or when there are too many
obstacles such as walls in between, the connection may be unstable.
The connecting approach in 3.3 will be available only for app QAT V2.0 and later
versions.