background image

Safety Information

IMPORTANT INFORMATION - PLEASE READ CAREFULLY

Read and keep these instructions.

Heed all warnings and follow all instructions.

Do not use this apparatus near water.

Clean only with a dry soft cloth.

Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

Warnings: 

To  avoid  the  danger  of  su

ff

ocation,  keep  all  polythene 

bags and packaging away from babies and children. 

To reduce the risk of 

fi

re or electrical shock, do not expose 

this product to rain or moisture. This product must not be 

exposed to dripping and splashing and no object 

fi

lled 

with liquids such as a vase of 

fl

owers should be placed 

on the unit.

Do  not  install  near  any  heat  sources  such  as  radiators, 

heat  registers,  stoves,  or  other  apparatus  (including 

ampli

fi

ers) that produce heat.

Do  not  defeat  the  safety  purpose  of  the  polarized  or 

grounding  type  plug.  A  polarized  plug  has  two  blades 

with  one  wider  than  the  other.  A  grounding  type  plug 

has two blades and a third grounding prong. The wider 

blade or the third prong are provided for your safety. If 

the provided plug does not 

fi

t into your outlet, consult an 

electrician for replacement of the obsolete outlet.

Take  note  of  all  warnings  on  the  appliance,  under  no 

circumstances disassemble the unit or remove covers to 

prevent the risk of 

fi

re or electrical shock. 

Protect the mains power cord from being walked on or 

pinched, particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

Use  only  attachments/accessories  speci

fi

ed  by  the 

manufacturer.

Unplug this unit during lightning storms or when unused 

for long periods of time.

No  naked 

fl

ame  sources  such  as  candles  should  be 

placed on the product.

Caution: 

Changes or modi

fi

cations not expressly approved by the 

manufacturer could void the user’s authority to operate 

this device.

Third  parties:  In  the  unlikely  event  that  you  pass  this 

product  on  to  a  third  party,  include  these  operating 

instructions with the product.

Service: 

Refer  all  servicing  to  quali

fi

ed  service  personnel. 

Servicing is required when the unit has been damaged 

in  any  way,  such  as  the  power  supply  cord  or  plug  is 

damaged,  liquid  has  been  spilled  on  or  objects  have 

fallen into the unit, the apparatus has been exposed to 

rain or moisture, it does not operate normally or it has 

been dropped.

Equipment  for  servicing  should  be  returned  to  the 

supplying  dealer,  or  to  the  service  agent  for  your  area. 

The address of the main Service Agent for the UK is listed 

at the back of this manual.

Important notice for UK users:

The  UK  mains  lead  is  terminated  with  a  UK  approved 

mains plug 

fi

tted with a 3A fuse. If the fuse needs to be 

replaced, an ASTA or BSI approved BS1362 fuse rated at 

3A must be used.

Safety Information

6

This  symbol  indicates  that  there  are  important 

operating  and  maintenance  instructions  in  the 

literature accompanying this unit.

This  symbol  indicates  that  dangerous  voltage 

constituting  a  risk  of  electric  shock  is  present 

within this unit.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a 

safety connection to electrical earth. 

Warning:

 The AC Input connector is used as a safety disconnect device. It must be easily accessible after installation.

Correct disposal of this product:

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent 

possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the 

sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the 

retailer where the product was purchased. They can take this product for environmentally safe recycling.

Summary of Contents for Q M4




















Reviews: