6
7
All the loudspeakers may be operated close to TV monitors with no ill-
effects with the exception of the 3060S which should not be operated
within 500mm of TV screens monitors or other magnetically sensitive
equipment. Plasma and LCD screens are unaffected.
Positioning
3010i and 3020i
The 3010i and 3020i are ideally mounted on Q Acoustics floor stands or wall mounted. If you are stand
mounting, a simple guide is that the treble unit should be at ear level to a seated listener. Wall mounted
speakers may be mounted slighter higher with the speaker angled down. Stand mounted speakers
should be treated as floorstanding speakers except that the speaker may be placed a little closer to the
back wall. Shelf mounting is also possible.
An optional bracket designed specifically to wall mount the Q Acoustics 3010i, 3020i and 3090Ci is
available from your dealer. Floor stands for the 3010i and 3020i are also available. Be prepared to
experiment to find the best setup for your taste in your particular listening room.
3050i
The 3050i loudspeakers
should be positioned at least
200mm from a back wall and
500mm from the side walls.
Placing the speakers closer
to the wall will increase bass
but could cause the sound to
boom and lack precision and
detail. The speakers should be
2m - 4m apart and central to
the seated listener. Turning the
speakers slightly inwards will
sharpen a stereo image but
may cause narrowing of the
sound source.
Subwoofer
Bass frequencies are substantially omni directional. Although this means that you can position the
subwoofer almost anywhere, the stereo image will still benefit by positioning the subwoofer level with
the front loudspeakers and as central to the listening position as possible. This may not be feasible in
a multichannel system. If you place the subwoofer close to a wall the bass will be re-enforced therefore
in some locations the bass may be boomy and indistinct.
ENGLISH (EN)
> 200 m
2.0 - 4.0 m
2.0 - 4.0 m
> 500 mm
