6
USE OF EXTENSION CORDS
CAUTION
FOR MODELS PWC1211 AND PWC1811
AN EXTENSION CORD CAN BE
USED PROVIDED IT IS RATED AT LEAST 15 AMPS @ 115 VOLTS WITH
GROUNDING-TYPE ATTACHMENT PLUG AND GROUNDING TYPE
CONNECTOR (LOAD FITTING)
FOR MODELS PWC2412 AND PWC3612
AN
EXTENSION CORD CAN BE USED PROVIDED IT IS RATED AT LEAST 20 AMPS
@ 250 VOLTS WITH GROUNDING-TYPE ATTACHMENT PLUG AND GROUNDING
TYPE CONNECTOR (LOAD FITTING)
FOR MODEL PWC6012
AN EXTENSION CORD CAN BE USED PROVIDED IT
IS RATED AT LEAST 30 AMPS @ 250 VOLTS WITH GROUNDING-TYPE ATTACH-
MENT PLUG AND GROUNDING TYPE CONNECTOR (LOAD FITTING)
FOR MODEL PWC3632
AN EXTENSION CORD CAN BE USED PROVIDED IT
IS RATED AT LEAST 20 AMPS @ 250 VOLTS, 3 PHASE
FOR MODEL PWC6032
AN EXTENSION CORD CAN BE USED PROVIDED IT
IS RATED AT LEAST 30 AMPS @ 250 VOLTS, 3 PHASE
FOR MODELS PWC3634 AND PWC6034
AN EXTENSION CORD CAN BE
USED PROVIDED IT IS RATED AT LEAST 20 AMPS @ 600 VOLTS, 3 PHASE
SPECIAL NOTICE—THREE PHASE OPERATION
Models PWC3632, PWC3634, PWC6032 and PWC6034
All three-phase
models are equipped with a three-phase monitor for added compressor
protection. The phase monitor, located in the control box, has multi-color LED that
reports status. The monitor protects the compressor from reverse operation, phase
loss and low voltage situations. Further description of the three-phase monitor is
located in the electrical section of the manual.
NOTICE -
DO NOT OPERATE ANY THREE-PHASE UNIT BY BYPASSING THE
MONITOR, THIS WILL VOID THE WARRANTY
