QT-5100A Module
Revision: 1
QT-5100 Module Rev 1-march15.doc
Page 4 of 8
Q5X Systems, Inc. 2018
RF Exposure Compliance:
The QT-5100A Module is granted with a modular approval for mixed mobile and portable applications.
The module is to be used by Quantum5X in their final products without additional FCC/ISED
(Innovation, Science and Economic Development Canada)
certification if they meet the following
conditions. Otherwise, additional FCC/ISED approvals must be obtained.
Mobile Application
:
1)
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
2) This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
3) To comply with FCC and ISED regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only
exposure condition must not exceed the 3 dBi.
4) For the 802.15.4 Radio, only approved antenna type with the maximum permissible gain can be
used with this device, such as the supplied fixed attenna or the SSMA whip attenna with a max
gain of 3 dBi.
5) For Canada, the EIRP power shall not to be greater than 250mW to meet ISED regulations
(Conducted power plus antenna gain)
Portable Application
:
This low power module when used in the specfied host configgurationzs listed below complies with
applicable RF exposure requirements that meet FCC/ISED for a portable device, which are approved
with this filing. For this application see the the output power reduction settings in specifiation table
page 8.
PlayerMicS
PlayerMic
AquaMic
RefMic
RefMicHD
Incognito
BeltMic
Module Integration into Host End Products
The QT-5100A Module Transmitter has been designed by Quantum5X Systems Inc. to be used by
Quantum5X as a building block for their wireless audio transmitter products. The module, as designed, is
