Quick Start Guide I
ncognito
QT5100I
This Quick Start Guide is an overview. Users are asked
to review the entire manual for detailed instructions
Included Hardware
:
•
Carrying pouch.
•
Incognito transmitter (QT-5100I)
•
Micro USB charging cable
Users Also Need
:
•
Q5X Gateway (remote control)
• Handheld MicCommander (QG-H2) or
• Network Gateway (QG-N3)
•
Analog receiver
•
Microphone (1-pin Lemo connector)
Prepare the Incognito Transmitter
:
Bring the transmitter out of storage mode (minimal
battery draw) and into standby mode (detectable but the
UHF radio is off) using either method below:
•
Hold the ON/OFF button until the status LED changes
from flashing rapidly to slowly, or
•
Plug and unplug a powered micro USB charging cable
into the side of the transmitter.
•
Connect the 1-pin Lemo microphone
Prepare the Gateway remote control (H2 or N3)
:
•
Install the antenna on the top. (NEVER power the
unit without the antenna in place.)
•
Power the Gateway as instructed in its manuals.
•
Turn on the unit by pressing the power button.
Pair the Incognito and Gateway remote control
:
• The
screen on the Gateway displays the serial
number of paired transmitters.
• Press
the <MENU> button to either scan for
transmitters or add the serial number found on the
PlayerMic antenna.
Adjust
:
• Set
the functions in the two transmitter menus of the
Gateway. Screen one includes frequency, power On/
Off, battery level, mic mute/live and mic gain.
•
Screen two includes: transmitter name, group, RF
power, 2.4GHz channel, storage and reboot.
Battery Life
:
4 hrs, 8 hrs, 16 hrs @ 50 mw
Option selected at time of purchase.
Dimensions
:
47.5mm x 43mm x 10.5mm
Hardware Diagram
:
Key
:
1. 2.4 G antenna
: For the RCAS control channel.
2. Audio input
: Connects to a waterproof
microphone with a 6-pin Lemo connector.
3. UHF antenna
: For RF signal transmission.
4. Serial number
: The unique number for RCAS ID
and control is on the back of the AquaMic.
5. N/A
6. Status
LED
: See manual for details on LED
patterns and colours.
7. Charge
LED
: Red = charging, green = charged
and flashing red/green = error.
8. Charging port
: AquaMic charges through the
same connector as the audio input using the
charge dongle.
9. On
/Off button
: There is no manual power
control button on the AquaMic to maintain the
waterproof seal.
10. Belt clip holes
: Allows vertical and horizontal
placement.
4
3
2
1
6
7
9
8
User Tips:
When using the Incognito,
you can change battery to
extend run time.
The innovative two part design
allows the option to mount the
transmitter inside a custom, bra
or balanced in a wig.