Q4 audio PTH 3 User Manual Download Page 4

Safety Instructions

1.

Read Instructions

 - All safety and operation instructions should be read before this unit is operated.

2.

 

Keep instructions

 - The operating instructions should be retained to serve for future reference.

3.

 

Observe Warnings

 - All warnings on the appliance and in this operation manual should be strictly followed.

4.

 

Water and Moisture

 - This unit should not be used near water - for example, near bathtub, washbowl, kitchen sink, laundry 

tub, in a wet basement or near a swimming pool, etc.

5

.

Heat

 - This unit should be placed away from heat sources, such as radiators or other devices which produce heat.

6.

Power cord protection

 - The power supply cords should be routed so that it is not likely to be stepped on or pinched by 

objects placed on or against them.

7.

   N

on-use periods

 - The power cord of the unit should be unplugged from the outlet when the unit is not used for a longer 

period.

8.

 

Object and liquid entry

 - Care should be taken so that objects do not fall and liquids are not spilled into the inside of the unit.

9.

Damage requiring service

 - Unplug the unit and refer servicing to qualified service personnel under the following conditions:

* Objects have fallen, or liquid has spilled into the unit; or
* The unit has been exposed to rain; or
* The unit does not appear to operate normally or exhibits a marked change in performance; or
* The unit has been dropped, or its chassis damaged; or
* When the power cord or plug is damaged.

10. Servicing

 - The user should not attempt to service the unit beyond those means described in this operating manual.  All other 

servicing should be referred to qualified personnel.

11. To prevent electric shock

 - Do not use the polarised plug with an extension cord, receptacle or other outlet unless the 

prongs can be fully inserted to prevent contact exposure.

12. Grounding or polarisation

 - Precautions should be taken so that the grounding or polarisation means of the unit is not 

defeated.

13. Internal voltage selector and fuse

 - The internal line voltage selector and the appropriate fuse should only be reset and 

reequipped for alternate voltage by a qualified service technician.  For more information, contact your authorised dealer.

14. Ventilation

 - Slots and openings in the unit are provided for ventilation, to ensure reliable operation and to 

prevent overheating of the unit.  These openings should not be blocked or covered!

4

PTH Series

User Manual

Summary of Contents for PTH 3













Reviews: