INSTALLATION
LED POWER SUPPLY - QTM-eLED+DMX
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change. Rev-10-07-21
CSA Requirements
•
Suitable for indoor use
•
This power supply must be installed according to the National Electric Code and local codes and ordinances and in
accordance with applicable installation code by a person familiar with the construction and operation of the product and
the hazards involved.
•
Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
•
This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
•
To avoid a hazard to children, account for all parts and destroy all packaging materials.
•
DMX shield wire must be grounded to earth ground at a single point external to power supply.
Model
Input Voltage
(V)
Frequency Nominal Output
Voltage (VDC)
Nominal Output
Wattage (W)
Input Current
(A)
QTM-eLED-100
QTM-eLED-200
QTM-eLED-300
120-277
120-277
120-277
0.95/0.40
1.90/0.80
2.85/1.20
50/60
50/60
50/60
24
24
24
100
200
300
QTM-eLED-60
QTM-eLED-120
QTM-eLED-180
120-277
120-277
120-277
0.60/0.29
1.20/0.58
1.80/0.87
50/60
50/60
50/60
12
12
12
60
120
180
Q-Tran, Inc.
Q-TRAN, INC.
MILFORD, CT U.S.A.
(203) 367-8777
WWW.Q-TRAN.COM
CLASS:
3425 - 15
3425 - 95
LOW VOLTAGE
LIGHTING SYSTEM
●
Type Ic Recessed, Inherently Protected
Type IC ENCASTRE, PROTECTION INHÉRENTE
● For Supply Connections Use Wire Rated
For At Least 60 C.
● Not for use with dimmers
NE CONVIENT PAS A DES GRADATEURS
● Suitable For Damp Locations
CONVIENT AUX EMPLACEMENTS HUMIDES
● 50/60 Cycle
● Class 1 or Class 2
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET
SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
QTM-eLED
120V-277
INPUT VOLTAGE
OUTPUT VOLTAGE
24V
12V
CONTROL TYPE
DMX
0-10V
WD
AW