© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change. Rev-06-15-23
COMPLIANT
QTM-eLED+DALI-DT6-AN
LED POWER SUPPLY 100W–200W
QTM-eLED
UNV
24VDC
2
Product
Prim. V
Sec. V
Control
2
Color
4
Size
1
Output Wiring 1
3
Output Wiring 2
3
3
Output Wiring
2-Wire Light Engines:
SW, SW-HE, SW-HE+, SD-SW, SC, WD
1
Size
Size
Max Load
(Watts)
Secondary Voltage
(24VDC)
Max Prim Amps @
120V
Max Prim Amps @
277V
100W
1x100W
24VDC
0.95A
0.40A
200W
2x100W
24VDC
1.90A
0.80A
2
Control: DALI-DT6-AN
Lutron Athena Node
Total
Wattage
DALI-DT6-AN-1
DALI-DT6-AN-2
Node 1
Node 1
Node 2
100W
100W
-
-
200W
200W
100W
100W
3
Output Wiring: 2-Wire Light Engines
SW, SW-HE, SW-HE+, SD-SW, SC, WD
4
Color: WH
White (Standard)
BK
Black Powder Coat Finish
NOTE:
DALI-DT6-AN-1: 1 Lutron Athena Node. 1 zone of control for 100-200W. The entire output is controlled as a single zone.
DALI-DT6-AN-2: 2 Lutron Athena Nodes. 2 zones of control for 200W. Each of the two outputs are controlled as independent zones.
DALI-DT6-AN is 2-wire only.
The QTM-eLED+DALI-DT6-AN is a powerful LED power supply designed for DALI 2 applications.
It features the 100W constant voltage LED Driver from Thomas Research and DALI 2 DT-6 Decoders,
ensuring exceptional functionality and efficiency. It also incorporates factory-installed Lutron Athena
Wireless Nodes, which streamlines installation time and allows for simple programming using the
Athena iOS or Android app. The power supplies and decoders are prewired together with terminal
blocks for easy installation of power and control wires. Combine Q-Tran lights and power with Athena
Wireless Nodes to create a complete Athena System to take your lighting to greater heights. Available
in 100-200 watt capacity, the QTM-eLED+DALI-DT6-AN can be recess or surface mounted.
See
for power supply without Athena Nodes.
NOTE:
DALI-DT6-AN-1,2 is
the quantity of nodes
mounted in the QTM
enclosure. Multiple
Athena nodes allow for
multiple control zones in
one QTM enclosure.
NOTE:
2-Wire default is 1 address. For customization or pre-programming contact a local
sales rep. DALI commissioning to be performed by a third party at time of installation.
Part Number Builder
WH (Standard)
BK
100W
N/A
200W
2
DALI-DT6-AN-1
DALI-DT6-AN-1
DALI-DT6-AN-2
Technical Information
Voltage Drop Chart
VDC
Watts
(W)
10 AWG
(5.6mm2)
12 AWG
(3.3mm2)
14 AWG
(3.0mm2)
16 AWG
(1.3mm2)
18 AWG
(0.78mm2)
20 AWG
(0.50mm2)
22 AWG
(0.33mm2)
24 AWG
(0.22mm2)
26 AWG
(0.13mm2)
24
17
25
40
80
100
897'
567'
309'
130'
84'
564'
356'
194'
82'
53'
355'
224'
122'
51'
33'
223'
141'
77'
32'
21'
140'
88'
48'
20'
13'
88'
56'
30'
13'
8'
55'
35'
30'
8'
5'
35'
22'
12'
5'
3'
22'
14'
7'
3'
*Distances are based on a 5% Voltage drop max.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
