CSA REQUIREMENTS
● Suitable for Indoor and Outdoor use
● This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation
code by a person familiar with the construction and operation of the product and the hazards involved.
● Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
● This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
● To avoid a hazard to children, account for all parts and destroy all packaging materials.
●
DMX Shield wire must be grounded
to Earth Ground at a single point external to Power Supply
QOM - eLED+DMX
CSA Label
© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
6
Model
Input Voltage
(V)
Frequency
Nominal Output
Voltage (VDC)
Nominal Output
Wattage (W)
Input Current
(A)
QOM-eLED-100
QOM-eLED-200
QOM-eLED-300
120
120
120
0.95
1.90
2.85
50/60
50/60
50/60
24
24
24
100
200
300
QOM-eLED-60
QOM-eLED-120
QOM-eLED-180
120
120
120
0.60
1.20
1.80
50/60
50/60
50/60
12
12
12
60
120
180
QOM-eLED
120V
INPUT VOLTAGE
OUTPUT VOLTAGE
24V
12V
CONTROL TYPE
DMX
0-10V
WD
AW
Model
Input Voltage
(V)
Frequency
Nominal Output
Voltage (VDC)
Nominal Output
Wattage (W)
Input Current
(A)
QOM-eLED-100
QOM-eLED-200
QOM-eLED-300
120 / 277
120 / 277
120 / 277
0.95 / 0.40
1.90 / 0.80
2.85 / 1.20
50/60
50/60
50/60
24
24
24
100
200
300
QOM-eLED-60
QOM-eLED-120
QOM-eLED-180
120 / 277
120 / 277
120 / 277
0.60 / 0.29
1.20 / 0.58
1.80 / 0.87
50/60
50/60
50/60
12
12
12
60
120
180
QOM-eLED
120V - 277V
INPUT VOLTAGE
OUTPUT VOLTAGE
24V
12V
CONTROL TYPE
DMX
0-10V
WD
AW
WARNING:
RISK OF FIRE. IF INSTALLATION INVOLVES RUNNING WIRE THROUGH
A BUILDING STRUCTURE, SPECIAL WIRING METHODS ARE NEEDED.
CONSULT A QUALIFIED ELECTRICIAN
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET
SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
● Suitable For Indoor Or Outdoor Use
● Wall Mount Only
INSTALLATION MURALE SEULEMENT
● Suitable For Mounting Within 1.2m (4ft) Of The Ground
PEUT ÊTRE INSTALLÉ À MOINS DE 1.2 M (4 PI) DU SOL
● Suitable For Use With Submersible Luminaires
Or Submersible Pumps
●
Suitable For Wet Locations
CONVIENT AUX EMPLACEMENTS MOUILLÉ
● This Control Unit Has More Than One Power Supply Point
Disconnect All Power Supplies Before Servicing
COUPER L’ALIMENTATION AVEN L”ENTRETIEN
● For Supply Connections Use
Wire Rated For At Least 60C.
● Keep Enclosure Cover Closed
● Read Installation Instructions Before Wiring
● Class 2
LOW VOLTAGE LIGHTING SYSTEM &
LED LANDSCAPE LIGHTING SYSTEM
Q-TRAN, INC.
MILFORD, CT U.S.A.
(203) 367-8777
WWW.Q-TRAN.COM
WARNING:
RISK OF FIRE. IF INSTALLATION INVOLVES RUNNING WIRE THROUGH
A BUILDING STRUCTURE, SPECIAL WIRING METHODS ARE NEEDED.
CONSULT A QUALIFIED ELECTRICIAN
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
● Suitable For Indoor Or Outdoor Use
● Wall Mount Only
● Suitable For Mounting Within 1.2m (4ft) Of The Ground
● Suitable For Use With Submersible Luminaires
Or Submersible Pumps
●
Suitable For Wet Locations
● This Control Unit Has More Than One Power Supply Point
Disconnect All Power Supplies Before Servicing
● For Supply Connections Use
Wire Rated For At Least 60C.
● Keep Enclosure Cover Closed
● Read Installation Instructions Before Wiring
● Class 2
CLASS:
3425 - 15 3425 - 95
3402 - 15 3402 - 95
LOW VOLTAGE LIGHTING SYSTEM &
LED LANDSCAPE LIGHTING SYSTEM
Q-TRAN, INC.
MILFORD, CT U.S.A.
(203) 367-8777
WWW.Q-TRAN.COM
CLASS:
3425 - 15 3425 - 95
3402 - 15 3402 - 95
