q-Tech QSW-9010, Cli Configuration Manual

Page: 26 / 101

User Manual
3. Remote ONU function configuration 26
www.qtech.ru
Description:
By default, ONU is active.
3.3. ONU Information View
QSW-9010 (config-gpon-olt7 / 6) # show onu remote info
3.4. ONU uni Port Enable/Disable
This command is used to control the uni port management status of the remote ONU, and configure
the Ethernet type user port to "enable" or "disable".
Enable:
OLT (config) interface gpon-onu1 / 1: 1
OLT (config-gpon-onu1 / 1: 1) # remote uni eth_1 / 1 enable
Disable:
OLT (config-gpon-onu1 / 1: 1) # remote uni eth_1 / 1 disable
Description:
By default, all uni ONU ports are “enable” state.
3.5. ONU capability set query
This command is used to query ONU actual ability. After the query to the actual capability of the ONT,
it can create the appropriate profile of ONT capability set based on it. .
QSW-9010 (config-gpon-onu7 / 6: 3) # show onu remote capability