q-Tech QSW-9010, Cli Configuration Manual

Page: 20 / 101

User Manual
2. Basic service configuration 20
www.qtech.ru
2. BASIC SERVICE CONFIGURATION
The GPON configuration includes configuration of GPON profile, GPON, ONU, GPON ports, GPON
traffic, and so on
2.1. GPON Profile
2.1.1. ONU Type Profile Configuration
The GPON ONU profile combines the parameters needed by the GPON access service to be
assembled. Among them, the GPON ONU capability profile contains the physical port type and
quantity configuration of ONU, the number of Cardholder and the number of uplink and downlink
queues.
Configuration:
GPON (config) # gpon
GPON (config-gpon) # profile onutype onu-4fe eth 4 pots 0 card 4
down-queue 8 up-queue 8
View onutype configuration:
GPON (config) # show profile onutype
Figure 2-1 View onutype Configuration
Delete onutype:
QSW-9010 (config-gpon) # no profile onutype onu-4fe
Note:
All the above configuration contains ONU 4 Ethernet ports, 4 cardholders, both up and down que are 8.
The number of card is 1 by default.
The number of Uplink/Downlin queue is 4 by default.