24
Attaching a PL-LA12 under a PL-SUB18
NOTE:
Remove all side panels from the PL-LA loudspeakers before deploying the array. Side panels have only a cosmetic
function and are not needed to ensure a safe deployment.
1. Attach two Straight Links on the front of the PL-SUB18. Use the
central hole
of the link as shown.
2. Attach two Y-Links on the middle of the PL-SUB18.
NOTE:
The nut side of the Y-Link will always be placed to the inside.
3. Attach the front of the loudspeaker to the Straight Link (labeled 1 in Figure 17).
4. Attach the back of the loudspeaker (slider bar in position FLY) to the Y-Link.
NOTE:
PL-LA8 cannot be attached under PL-SUB18.
NOTE:
To add additional PL-LA loudspeakers, see "Attaching PL-LA to Array Frame Up Tilt" on page 21.
NOTE:
Metallic continuity is ensured from the array frame to the PL-LA12 loudspeaker thanks to a strut located inside the
PL-SUB18 Subwoofer. See dotted line on Figure 20.
2
1
Central
Hole
2
1
4
3
Figure 20
Summary of Contents for PL-LA Series
Page 36: ...36...