Q-SUN Xe-1, Quick Setup Manual

Page: 12 / 35

Shipping Weights (Approximate) Xe-1-B, Xe-1-SE Xe-1-WE Xe-1-BCE, Xe-1-SCE
Tester On Skid With Wooden Frame 134 kg (296 lbs) 163 kg (359 lbs) 227 kg (500 lbs)
Tester On Skid With Carton Only 89 kg (195 lbs) 131 kg (288 lbs) 172 kg (380 lbs)
Tester Only* 50 kg (110 lbs) 89 kg (195 lbs) 124 kg (272 lbs)
* Tester weight varies based on installed options and includes chiller, where applicable.
Xe-1-B, Xe-1-SE, Xe-1-WE
●
Q-SUN Xe-1-B, Xe-1-SE, and Xe-1-WE testers are shipped in one of two types of packaging
(
Figure 5.2a and Figure 5.2b ).
●
Labels on the carton indicate the location of the instructions to be opened first ( Figure 5.2c ).
●
Instructions for unpackaging and setting up the tester are located in the envelope shown in Figure 5.2d .
12
Section 5. Uncrating
5. Uncrating
5.1 Overview (Feb 2022)
Carefully read these instructions before uncrating the tester. Follow all local,
OSHA, EHS, and other applicable equipment operation and material handling
safety requirements, recommendations, and practices.
5.2 Models Without Chiller (Feb 2022)
Tools Required
Phillips Screwdriver (Wooden Crate Only) Flat Blade Screwdriver Fork Lift*
Pry Bar (Wooden Crate Only) Ratchet and 15 mm (9/16”) Socket Small Ladder or Step Stool
Band Cutter Utility Knife Stubby Screwdriver (Xe-1 chiller models)
* A fork lift or other mechanical lifting device is recommended for use in moving the crated tester to the installation location,
and to lift the frame in one piece from wooden frame crates.
Figure 5.2a: This packaging has a carton
banded to a wooden skid
Skid
Open First
Label
Carton
Figure 5.2b: This packaging has a carton surrounded
by a wooden frame fastened to a wooden skid.
Skid
Wooden
Frame
Open First
Envelope