4 Channel Digital Video Recorder
9
4. Hard Disk Connection
To install the Hard Disk follow the installation sequence illustrated below.
Note: If the DVR comes with a HDD, skip the following steps.
1. Pull out the hard drive rack
from the DVR
side panel.
2.
Open the top cover of the drawer.
3. Jump HDD to Master
Jump to Master
4. Connect the ribbon (IDE) cable & power
cable.
5. Close the top cover of the drawer
and
put
the hard drive drawer back into the DVR.
(Make sure the cables are firmly pressed onto
the HDD interface
)
6.
Lock the hard drive draw by turning the
key clockwise.
If you have another HDD, please jump that HDD to SLAVE, open the DVR cover, put the HDD to a
second HDD shelf, and then connect the power and ribbon cables.
