Closing with a mechanical key
Rotate the mechanical key in the keyhole ( 90
anticlockwise if right
handed lock, 90
clockwise if left handed lock) till the mechanical key
is vertical, draw out the mechanical key. The door is locked.(figure 2-4)
2.2
Wake-up code
What is wake-up code?
Normally, the fingerprint sensor
sleeps
till it is
waken up
by
inputting correct code. Before unlocking the door with fingerprint, one
should input valid code to
wake up
the sensor so that it can
authenticate the enrolled fingerprints. The default wake-up code is
0,1,2,3
How to change the wake-up code?
Step 1 : Press digit
3
and hold it for 6 seconds till you hear a
beep.(figure2-5)
Press digit
3
and hold
it for 6 seconds
Step 2 : input the previous Wake-up code continuously (the default
code is 0,1,2,3), a long beep is heard and green indicator flash once.
(figure 2-6)
Step 3 : Immediately input twice the new Wake-up code continuously.
If the new code is twice input correctly, a long beep will be heard and
green indicator flashes indicating the success of the operation.
(figure 2-7)
input the previous Wake-up code
the default code is 0,1,2,3
green indicator
flash once
green indicator
flashes
input twice the new Wake-up code
The principle for key combination of wake-up code
The initial digit of Wake-up code must be
0
. For example, you can
choose(0,0,0,0) , or (0,2,2,2) etc. But do remember the wake-up code
begins with
0
.
(0,1,2,3) is the default wake-up code for this lock, if you forgot the
new wake-up code you've modified, you can restore the default wake-
up code by following below steps:
How to restore the default wake-up code?
Left Handed
Right Handed
H
tt
p
:/
/w
w
w
.q
-s
e
e
.c
o
m
LOCK
