4
5
INTRODUCTION 5
INSTALLATION 6
Positioning Your Camera
6
Mounting the Camera
7
Connecting the Camera to a Security DVR System
9
Adjusting Zoom and Focus
10
Controlling Your Camera
11
OPERATION 12
Setup Menu
12
Lens 13
Exposure 13
White Balance
15
Day/Night Mode
16
Special 17
Image Adjust
19
Reset 19
TROUBLESHOOTING 20
SPECIFICATIONS 21
Q-SEE PRODUCT WARRANTY
24
TABLE OF CONTENTS
For your safety
To prevent damage to your Q-See product or injury to yourself or to others, read and understand the following safety precautions in
their entirety before installing or using this equipment.
Product Features
These cameras offer the following features:
n
Digital SDI technology
n
Digital 1080p high definition resolution.
n
State-of-the-art IR cut filter to ensure accurate color representation during the day and sharper images at night.
n
Low light and infrared operation. The camera takes advantage of even low levels of ambient lighting to produce images with color.
n
Automatically switches to infrared (black and white) mode when no light is detected.
n
Infrared illumination ranging from 45 to 90 feet, depending on model
n
On-Screen Display (OSD) allows you to configure some cameras using the built-in thumbstick when connected to a monitor.
n
Customizable settings: WDR (wide dynamic range), White Balance, Backlight Compensation, Shutter Speed, etc.
n
High Spotlight Back Light Compensation. Excessive light, such as headlights, can be masked if desired.
INTRODUCTION
n
Care should be taken during transportation, storage and installation of this camera to avoid rough handling, dropping, or other
abuse in order to prevent damage to the optics or components inside the camera.
n
Camera should be installed in accordance with electrical standards including keeping the camera and cable away from high
voltage, using a surge protector and using only the rated power supply.
n
Do not use strong or abrasive cleaners on camera body or lens. Use a damp cloth for cleaning the housing and a lens cloth for the
optics.
n
Do not attempt to disassemble the camera. Only authorized, trained technicians should service this camera.
n
Cameras should not be immersed in water and should be mounted in a sheltered location. Do not point camera directly at the sun
or other strong light source.
WARNING! ELECTRIC SHOCK RISK!
IMPORTANT!
When selecting a surge protector, it is STRONGLY recommended to use one that is UL-1449 rated,
for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.
