（
2
）
Input the IP address on the Touch Panel and click Connect.
（
3
）
It will enter the homepage of Touch Panel after connecting successfully.
3.Audio and video device control
Functions
Descriptions
Video Source
Switch the video input sources among three displays
Audio Source
Switch between the audio of HDMI In and Audio In
(Note: the audio can be switched only when it’s from
HDMI In to HDMI Out A)
Volume Adjustment
Adjust mic volume/treble/bass, and mic+audio
volume/treble/bass
Power Control
Power on and off the Display and External
Curtain Control
Roll up/down and stop the curtain
A/C Control
Control power/mode/temperature/fan status
Remote Control
Infrared remote control (learning code refers to NMP
user manual)
4. Troubleshooting
(1) No response while clicking Lock:
Check if you have set
Swiping card for powering on
at Q-NEX Dashboard.
(2) Touch Panel is unable to connect to NMP:
Check if the IP address of NMP is correct and if Touch Panel is on the same LAN as NMP.
3) Infrared functions don't work (like A/C, remote control, etc,).
Please check if NMP has successfully connected to the network.
4) Unable to access the device ID.
Please check if NMP has successfully connected to the network.
5) Unable to OTA update.
Please check if NMP has successfully connected to the network.
Please contact Q-NEX sales team for other questions：
[email protected]
[Kd197EN]-Q-NEX Touch Panel CPL10 - Quick Guide 20220520
www.QnexTech.com
[email protected]
6th Bldg. High-Tech Base. Fuzhou Fujian Prov. China
