Q-Lab Q-SUN Xe-2, Quick Setup Manual

Page: 6 / 38

Inside the Lamp Door
●
IMPORTANT:
Always shut off the Xe-2 power switch before opening the lamp door.
●
The Xe-2 high-voltage xenon lamp is located under the lamp door on top of the machine.
●
For safety, a tool (slotted screw driver) must be used to open the door ( Figure 2.1c ).
●
Figure 2.1d shows safety labeling and electrical components.
●
An interlock switch ( Figure 2.1d ) turns off lamp power when the lamp door is opened.
●
The xenon lamp is very hot. Wait 15 minutes after stopping the machine to remove the lamp.
Section 2. Safety Information
6
Figure 2.1c: Lamp door located on top of the Xe-2 cabinet.
Figure 2.1d: Inside the lamp door.
800 Volt Wire
Lamp Power
Connector
High Voltage
Ignition
Transformer
(Under Cover)
Xenon
Lamp
Below
Interlock
Switch
WARNING
High voltage can
cause death or
serious injury.