background image

5

Connections

Connect Power

Caution:

Risk of product damage! Ensure that the power  

 

supply voltage corresponds to the voltage  

 

printed on the back or the underside of the unit.

Before connecting the power cord, ensure  

 

you have completed all other connections.

 

Connect the power cord to the wall outlet.

 

USB Charge

Connec t a USB cable( not supplied) to USB 
Charging 5V   2.1A socket to charge your smart-
phone or tablet PC.

AC ~

Connect to External Audio Device

You can also listen to an external audio device 
through this unit.

Connect audio cable to:
- The 

AUX

 socket on this unit.

The audio output socket on external audio  

 

device (e.g. TV, iPhone......) .

Install remote control batteries

Prepare the Remote Control

The provided Remote Control allows the unit to 
be operated from a distance. 

z

  Even if the Remote Control is operated within  

 

the effective range (6m), remote control  

 

operation may be impossible if there are any  

 

obstacles between the unit and the remote  

 control. 

z

  If the Remote Control is operated near other  

 

products which generate infrared rays, or if  

 

other remote control devices using infrared  

 rays 

are 

used 

near the unit, it may operate  

 

incorrectly. Conversely, the other products  

 

may operate incorrectly. 

For First-time use:

The unit has a pre-installed 
lithium CR2025 batter y. 
Remove the protective tab to activate the remote 
control battery.

To Replace the Remote Control Battery:

1

2

1  Pull out the battery tray and remove the old  
 battery.
2  Place a new CR2025 battery into the battery  
 

tray with correct polarity (+/-) as indicated.

3  Insert the battery tray back into the slot.

Precautions Concerning Batteries

z

  When the Remote Control is not to be used  

 

for a long time (more than a month), remove  

 

the battery from the Remote Control to   

 

prevent it from leaking.

z

  If the batteries leak, wipe away the leakage inside 

 

the battery compartment and replace the   

 

batteries with new ones.

z

  Do not use any batteries other than those  

 specified. 

 

z

  Do not heat or disassemble batteries. Never  

 

throw them in fire or water.

z

  Do not carry or store batteries with other  

 

metallic objects. Doing so could cause batteries  

 

to short circuit, leak or explode.

z

  Never recharge a battery unless it is confirmed  

 

to be a rechargeable type.

Summary of Contents for QAA14AV013










Reviews: