1. Clean the surfaces of the speakers where the feet will be applied,ensuring they are free from dirt
and grease.
2. Remove the rubber bumpers from their backing paper. Take care to grip the sides rather than the
adhesive surface
3. Position the bumpers on the underside of the speakers and push firmly onto the surface. Once contact
is made the feet can not be easily repositioned.
Instructions
12
Rubber Bumpers
In order to prevent damage to the surface of other furniture, Q-BT3 is supplied with self adhesive feet which
may be applied to the underside of the speakers. Once the desired orientation of the speakers has been
selected, follow the steps below to attach the rubber bumpers to each speaker.
