Call Me cod. CM100 - Installation & use manual 07/06/2013
The following are all the commands for the configuration of Call Me, to be transmitted via SMS text message.
COMMAND DESCRIPTION
COMMAND
NOTE
Password change
PASSWORD:YYYY;XXXX
Changing your current Call Me password
YYYY is the new password which must have 4
digits.
Impostazione numero telefonico preferenziale
NUMBER;XXXX
This phone number is sufficient to make a call; Call
Me automatically refuses to respond, then sends an
SMS to that number with its location. In this way, the
caller will not lose credit. The preferred number is
also used by Call Me to send alarm activation
messages.
Richiesta posizione del veicolo
POSITION;XXXX
A message to request the position of the vehicle from
any number.
Call Me will respond to the number
from which the SMS has been sent with its current
location.
Activation/deactivation of output 1 (green wire)
OUT1:ON;XXXX
OUT1:OFF;XXX
Activation or deactivation of auxiliary output 1.
(green wire)
Activation/deactivation of output 2 (white wire)
OUT2:ON;XXXX
OUT2:OFF;XXXX
Activation or deactivation of auxiliary output 2.
(white wire)
Activation/deactivation motion allarm
MOTION:ON;XXXX
MOTION:OFF;XXXX
If activated a
message is sent when the vehicle
moves 50mt from where it was activated.
Activation/deactivation speed allarm
SPEED:OFF;XXXX
SPEED:YYYKM/H;XXXX
SPEED:YYYMPH;XXXX
If activated a message is sent when the vehicle
exceeds the set speed (in km/h or miles).
SMS or RING commad confirmation
CONFIRM:SMS;XXXX
CONFIRM:RING;XXXX
Selecting this type of confirmation command from
Call Me.
SMS: Call me will send a “PZRacing Command
Confirmed” sms;
RING: Call Me will get in touch by phone. We
recommend that you reject the call as not to use
credit.
Setup request
SETUP;XXXX
Send an SMS with all the parameters of the device.
XXXX:PASSWORD (DEFAULT=1234)
PZRacing – Via A. De Gasperi, 5 61032 Fano (PU) Italy – Tel: +39 0721 820434 Fax: +39 0721 837322 [email protected] – www.pzracing.it
4
