5.4
Diagnosis Screen
From the
Diagnosis
screen, you can check the diagnosis condition as well as
Send to Pyxis
. This feature
may be used for technical support when communicating with
To preform a probe cleanliness check, first select the
Diagnosis Condition
which defines the fluid type that
the ST-565 Series probe in currently measuring, then press
Cleanliness Check
. If the probe is clean, a green
Clean
message will be shown. If the probe is partially fouled, a yellow
Becoming Dirty
message will
be shown. If the probe is severely fouled, a red
Dirty
message will be shown. In this case, follow the
procedure in the
Methods to Cleaning the ST-565 Series Probe
section of this manual.
Figure 8.
ST-565 Series User Manual
| +1 (866) 203-8397
9
Summary of Contents for ST-565
Page 1: ......