Figure 6.
In the
Setting
screen, you can set the Level Sensor Settings by renaming the
Device Name
. The
Sampling
Mode
can be changed to your preference. To configure the tank, enter the settings by pressing on
Tank
Volume
,
Installation Height
,
Max Level
, and
Display Units
. To save the settings, press
Apply Settings
.
*
NOTE
*
Max Level Height must be at least 4 inches less than Installation Height
Figure 7.
To verify your readings after setting your parameters click on
Reading
.
LS-200 User Manual
| +1 (866) 203-8397
7
