5.3
Calibration Screen and Reading
When connected, the
uPyxis®
Mobile App will default to the
Calibration
screen. From the
Calibration
screen, you can perform calibrations by pressing on
Zero Calibration
,
Slope Calibration
, and
4-20mA Span
.
Follow the screen instructions for each calibration step.
Figure 7.
5.4
Diagnosis Screen
From the
Diagnosis
screen, you can check the diagnosis condition as well as
Export & Upload
. This feature
may be used for technical support when communicating with
To preform a probe cleaniness check, first select the
Diagnosis Condition
which defines the fluid type that
the ST-525SS probe in currently measuring, then press
Cleanliness Check
. If the probe is clean, a green
Clean
message will be shown. If the probe is partially fouled, a yellow
Becoming Dirty
message will
be shown. If the probe is severely fouled, a red
Dirty
message will be shown. In this case, follow the
procedure in the
Methods to Cleaning ST Series Probe
section of this manual.
ST-525SS User Manual
| +1 (866) 203-8397
7
