Figure 74.
11.4.2
Bluetooth Pairing
1. Power on the SP-710 by pressing
.
2. Press
System
(
) to launch the
DEVICE INFORMATION
screen.
3. Press
Comm
(
) to launch the
COMMUNICATION
screen (Figure 75).
4. Press
Scan
(
) to begin scanning for Bluetooth devices.
5. Discoverable devices will begin to populate on the display with their name and MAC-Address (Figure
*
NOTE
*
To verify pairing to the correct pH/ORP module, the MAC-Address of the
pH/ORP module can be found in its provided COC (Certificate of Calibration).
6. If more than one device appears in the
Device list
, press
»
(
) to cycle through the devices.
7. If no devices or the incorrect device appear in the
Device list
, press
Scan
(
) to re-scan for discov-
erable devices.
8. Press
Pair
(
) to begin pairing to the selected device.
9. If pairing is successful, the message ”Pair Success!” will appear in the top-left corner of the display
(Figure 77).
10. Bluetooth pairing is complete. Long press
Pair
(
) to return to measurement mode.
Figure 75.
Figure 76.
Figure 77.
SP-710 User Manual
| +1 (866) 203-8397
42
Summary of Contents for 50352
Page 1: ......