© 2005 Directed Electronics, Inc. Vista, CA
4
43
3
ssyysstteem
m ffeeaattuurreess lleeaarrnn rroouuttiinnee
The System Features Learn Routine dictates how the unit operates. It is possible to access and change any of
the feature settings using the Valet/program switch. However, this process can be greatly simplified by using the
optional Personal Computer Interface or Bitwriter (p
p//n
n 9
99
98
8TT). Any of the settings can be changed and then
assigned to one of up to four transmitters. This feature is called Owner Recognition. Each time that particular
transmitter is used to disarm the system, the assigned feature settings will be recalled. Owner Recognition is
only possible when programming the unit via the computer interface or hand-held programmer.
If programming with the PC interface or the Bitwriter (p
p//n
n 9
99
98
8TT), the learn routine can be locked or
unlocked. If the learn routine has previously been locked, it must be unlocked before proceeding with
reprogramming the learn routine. This must be done by using either p
p//n
n 9
99
98
8TT or the PC Interface module - this
cannot be done manually with the Valet switch. If the learn routine is locked, features cannot be changed.
TTo
o een
ntteerr tth
hee SSyysstteem
m FFeeaattu
urreess LLeeaarrn
n R
Ro
ou
uttiin
nee™
™::
1.
O
Op
peen
n aa d
do
oo
orr.. ((The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2.
IIg
gn
niittiio
on
n.. Turn the ignition on, then back off. (The heavy gauge PINK wire of the relay
satellite must be connected.)
3.
SSeelleecctt aa M
Meen
nu
u.. Press and H
HO
OLLD
D the Valet®/Program switch. (The Valet®/Program switch
must be plugged into the blue port.) After three seconds the siren will chirp once indi-
cating entry to the Basic Features Menu. If this is the menu you wish to access, release
the button and go on to Step 4. If the button is not released, you will jump to the next
menu and the siren will chirp twice. There are three possible menus. Once you have
selected the desired menu, release the Valet®/Program switch.
4.
SSeelleecctt aa FFeeaattu
urree.. Press and release the Valet®/Program switch the number of times corre-
sponding to the feature you wish to change. For example, to access the third feature, press
and release 3 times. Then press the button once more and H
HO
OLLD
D it. The siren will chirp the
number of times equal to the feature you have accessed.