©
2002
Directed Electronics, Inc.
21
2-9 CHANNEL 3 VALIDITY/LATCHED/LATCHED RESET WITH IGNITION/30 SECOND
TIMED/SECOND UNLOCK OUTPUT:
Channel 3 can be programmed for these output configu-
rations. The unit is set to the default validity output. To change the configuration, use the two-chirp
setting to toggle to the different configurations.
Transmitter/Receiver Learn Routine
The system comes with two transmitters that have been taught to it. The system can store up to
four different transmitter codes in memory. Use the following learn routine to add transmitters to
the system or to change button assignments if desired.
If the system was previously programmed using the 998T Bitwriter, the learn routine may be locked.
If the siren generates one long chirp when attempting to program the unit, the learn routine is locked
and must be unlocked using the 998T Bitwriter before proceeding.
1. O
Oppeenn aa ddoooorr.. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be
connected.)
2. T
Tuurrnn tthhee iiggnniittiioonn oonn.. (The YELLOW wire, H1/9 must be connected.)
3. SSeelleecctt tthhee rreecceeiivveerr cchhaannnneell:: Press and release the Valet/Program button the
number of times necessary to access the desired channel.
NOTE: If adding a remote, a button must be taught to the unit in the Channel 1 or Channel 5
position prior to programming other channels.
Press and hold the Valet/Program button once more. The siren will chirp and the LED will blink
the number of times corresponding to the channel that is accessed.
