PCX User Manual
12
RINS459-2
4.5 Walk Test
The Walk Test enables you to check that all the detectors are working properly. Follow the procedure below:
D
C
B
A
WALK TEST?
Press
.
D
C
B
A
Walk Test Parts
[ABCD]
Enter the partitions that you wish to test, using the A, B,
C and D keys. Once you have chosen them, press
.
The Walk Test will commence.
D
C
B
A
Walk Test Zones
Zone 01
The zones to be tested will scroll on the bottom line of
the display. Walk around the building, ensuring that you
pass each detector to be tested. As each detector is
activated, a chime will be played, and that zone will be
removed from the scrolling list.
D
C
B
A
Walk Test
Completed
When all the detectors have been activated, the display
shows “Walk Test Completed”. Press
to complete
the test, and then
to return to the main Manager
Menu..
4.6 Bell Test
Follow the procedure below to test any external sounders connected to the system.
D
C
B
A
BELL TEST?
Press
.
D
C
B
A
Testing Bell . . .
The bell will sound, and the strobe will flash. When the
test is completed, press
to return to the main
Manager Menu.
4.7 Enter Engineer Menu
This selection is reserved for your service engineer, and cannot be accessed without the Engineer Code.
4.8 Exit Manager Mode
Select this option to save any changes you have made, and return to normal, disarmed mode.