User Manual
Page: 22
13.11
Dial Out Menu
The control panel may be dialled into, and programming information kept on a PC using the
InSite UDL software. This function allows the control panel to dial a Pre-programmed PC
telephone number (programmed by your engineer) to directly dial to a PC. This is usually used
when your engineer requests it.
Press
b
or
A
keys to scroll to ‘DIAL
OUT MENU’. Press
I
.
Press
[
or
]
to scroll through the
different PC numbers, press
I
to dial
that number
Press
[
or
]
to select the operation
that needs to be performed. Press
I
.
The control panel will dial the
programmed PC. If this fails please
contact your engineer.
Press
A
.
13.12
Allow Engineer Menu
If this function is enabled, the engineer will require authorisation from you before they can
access the engineering menu.
Press the
b
or
A
keys to scroll to ‘ALLOW
ENGINEER MENU’. Press
I
.
Press
[
or
]
to select either ‘Yes’ or
‘No’. Press
I
.
13.13
Block Remote Set
Your wireless alarm system may be configured so that your alarm installation company can
remotely set/unset. Should you wish to block this access, you can enable this function
Press the
b
or
A
keys to scroll to
‘BLOCK REMOTE SET’. Press
I
.
Press
[
or
]
to select either ‘Yes’ or
‘No’. Press
I
.