RINS1559-4
GREEN PULSING
Connecting to network
ORANGE ON
When making a call
ORANGE
ORANGE GREEN
SIGNAL STRENGTH
ON = Signal Strength Full
SIGNAL STRENGTH
ON = Signal Strength 50%
SIGNAL STRENGTH
OFF = No Signal Strength
12V DC
Connection
Modem
Data
Connection
SIM
CARD
slot
Inserting a SIM Card
SIM CARD NOT PROVIDED
The GSM Modem is compatible with GSM networks
and will not work with networks that provide a 3G
Signal only (for example the 3 network).
The Printed Circuit Board
LED Status
The DIGI-GSM is only available for the PCX 46 and Enforcer V9 and above.
Antenna
Connection
Status
LEDs
Troubleshooting:
- If no signal strength is displayed, try relocating the
antenna in a new location.
- If the GSM is not dialling out, check the modem is
enabled in programming, the SIM card is inserted and
the modem data connection is connected correctly. Also
check to see if the GREEN LED is pulsing which will
show that it is connecting to the network.
- If no LEDs are displayed, check the power connection
or connect a se12V to the GSM
- If the GSM is not recognised with the control panel,
power down and back up.
x4
LARGE HOUSING:
8x Screws
M3 x 5
4x Pillars
M3 x 8
SMALL HOUSING:
4 x Screws
4x
1/4
ENFORCER HOUSING:
Clips into place
D I G I - G S M
GSM Digital Communicator
T: +44(0)845 6434 999 (local rate) Or T: +44(0)1709 535225 (For Alarm Engineer only)
Customer Support opening hours: 8:00am – 6.30pm Monday to Friday
