Pyramida CXW-KH 50, Maintenance Manual

Page: 34 / 48

EN
34
Extractor fan is equipped with removable protective fat
filters. Filters guarantee absorption of suspended solids,
that’s why they can become dirty depending on frequency of
fan use.
To guarantee maximum capacity and efficiency of fan
work, it is necessary to regularly clean fat filters from
contaminations.
Cleaning is carried out each 5-6 weeks by hand with suds
without strong mechanical effect or in dishwashing machine.
Cleaning of fat filters periodicity
increase complicates air absorption
by the fan. This leads to engine load
increment and may influence extractor fan life time.
Manual cleaning is carried out in the following order:
- remove the filter, having pressed the filter lock beforehand;
- wash the filter with cleaning agent or suds with the help
of sponge or dauber;
- thoroughly wash the filter with warm water;
- wait until the filter is absolutely dry;
- set the filter into the extractor fan, having pressed the
filter lock beforehand.
In case of cleaning with a dishwashing machine make sure
that the cleaning agents you use with your machine do not
contain deleterious substances that may damage the surface
of aluminum filter details. In the dishwashing machine, place
filters vertically to avoid food remains getting in. Before
installation of the filter into the fan after washing in the
dishwashing machine make sure that the filter is dry.
In case
of failure to comply present roles the filter may be damaged!
FILTER CLEANING