TIMETRAX™ SYNC RF WIRELESS DIGITAL CLOCK
Installation Instructions
OVERVIEW
ETHERNET
Thank you for choosing a TimeTrax™ Sync RF Wireless Clock System. The TimeTrax™ RF Wireless Clock System
receives dependable, accurate time from the TimeTrax™ Sync RF Wireless Transmitter.
IMPORTANT: Prior to clock installation, install TimeTrax™ Sync RF Wireless Transmitter and complete software
set-up (part #9T1WI or S9DWXSLAUB sold separately).
IMPORTANT: WIRING SHOULD BE COMPLETED PER ELECTRICAL CODE AND PERFORMED BY A LICENSED
ELECTRICIAN.
Before clock installation, please remove security bracket from back of clock (see instructions below).
For more information, visit pyramidtimesystems.com or call our technical support team at
888.479.7264
during
regular business hours:
8am-5pm EST, M-F
.
SECURITY BRACKET REMOVAL
Prior to installation, detach metal security bracket from clock by inserting included release key into slot
located on back of clock.
Push key all the way into slot. Key will slide easily until some resistance from locking tab is felt.
With key fully engaged, slide the security bracket down and off of the clock.
I2255
Page 1 of 5
888.479.7264
pyramidtimesystem.com
