1) Voltage Selector:
AC 110/220 Volt Selectable Switch.
2) Power Cord:
Connect cord to an AC outlet.
Troubleshooting
Distorted Sound:
Check if the amplifier is overdriven. If it is, you will
have to turn the level down.
Check signal source.
Try disabling Bass Expander.
Signal sounds discolored:
Check and adjust the EQ settings.
Ensure you are using quality cables.
Check signal source.
No Sound:
Check connections.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.
Intermittent Output:
Check connections.
Try a different cable.
Specifications
1
3
4
5
6
7
8
9
10
11
1
2
Model
Driver
RMS
Peak
Dimensions
Weight
GA410
60W
400W
8" High
Definition
Speaker
1) Power Switch:
Switches amplifier on/off.
2) Power LED:
Illuminates when power is switched on.
3) Input Jack:
Connect your instrument to this jack.
4) Master:
Adjusts overall volume.
5) Volume:
This sets the volume gain level.
6) Bass:
This control adjusts the low frequency level.
7) Mid:
This control adjusts the middle frequency level.
8) Treble:
This control adjusts the high frequency level.
9) Bass Expander:
Toggles an extra bass effect.
10) Output Jack:
Lets you output a line level signal
(non-amplified). Internal speaker is not disabled.
11) Phones:
This is your headphone connection. Inserting
the headphones disables the internal speaker
(great for practicing).
W=13"
H=16"
D=9 2/5"
18.3 lbs
2
3
2
